RC38 Air Force Long Travel Hollowform Lock-Out Equipped Price £465

In 1994 Pace invented the hollow alloy fork crown and eight years on our latest cold forged 7075T6 Hollowform version is at the zenith of mechanical efficiency. And command and control is what the RC38 is all about. 100mm of highly refined, linear, air sprung travel which can be instantly locked-out as easily as changing gear. Premium quality, weight, stiffness and performance make our RC38LT the definitive epic ride/ marathon event fork.

Specification Note: Fork is shown with optional Dark stanchions + £33.95 Part Number: SF38AFLTHF-LO Weight: 1520g Length/Travel: 474mm. 100mm travel Slider chassis: Hollowform one-piece high modulus carbon fibre bridge and leg assembly. Magnesium dropouts ISO std disc mount (max disc diameter 165mm) Steerer: Hollowform 7075T6 material ensures maximum strength. Extremely resistant to fatigue and impact load. Tested to Din 79100 Crown: Hollowform cold-forged, heat-treated, cnc machined. Very light and stiff. Totally cool Lock-Out System: Needle operated conical valve. Super flexible cable with ‘Swivelhead’ kink resistant design. Forged/cnc machined lever Damping System: Open chamber oil damper Separate rebound/compression damping circuits Compression- Conical control valve Rebound- Rotary control valve Lock-Out System: Needle operated conical valve. Kevlar control cable, cnc’d/ stainless steel lever assy Spring system: Twin compression air chambers. with differing volumes for smooth progression and infinite spring curve adjustability. Separate negative air spring chamber provides high sensitivity. Light alloy Schrader Valves for reliable- easy pressure adjustment Bearings: PTFE faced aluminium for low breakaway friction and long life Seals: Pace Twin wiper design for maximum performance in poor conditions Stanchions: 28.6mm Micro-crack plated chrome ground steel for lowest friction/high strength characteristics G-Spot: Lubricant can be injected directly onto bearing surfaces.

Hollow Form Options

Hollowform disc hose guide kit Price £14.65

Adjustable jaws clamp to any diameter of brake hose and swing the hose into the desired position. Simple and neat, cnc machined Hollowform implants retain the forks smooth lines for perfect detailing.
Part Number; SFAUP-2328

Implants
Hollowform V-brake kit RC36/38 Price £26.45
Special brass inserts are moulded into the root of the Hollowform bridge, creating the stiffest foundation for our cnc machined V-brake mount implants. Implants are recessed into the forks carbon fibre pocket
and secured with oversized lightweight stainless steel screws.
Note Use a short Shimano cable guide tube when fitting V-brakes.
Part Number; SFAUP-2311

Dark Option Price £33.95

An advanced surface treatment, Titanium Aluminium Nitride is coated onto the chrome ground stanchion tubes. Dark blue-black in colour and a mere 4 microns thick this armour plating both reduces friction and creates a super tough shield of 3000 HVN.
Part Number; SFUP-2338

1” Steerer Price £20 Price £33.95
Factory fitted to special order; RC31/36/38
Even with a smaller diameter, using 2014T6 aluminium makes this steerer super strong and highly resistant to fatigue.
Part Number; MISAUP-2208

V-brake mounting kit. RC31 Price £35.55
Our cnc machines carve away every gram from these beautifully sculptured clamps. Split design for ease of adjustment and suitable for front or rear brake mounting.
Part Number; RF31-101