How to: Service your Hope Pro 2 rear hub

Bikemagic Bikemagic

Our second how-to of the day, this time from the folk at Hope who are here to talk you through a re-build of their Pro 2 rear hub.

“The now proven range of Pro 2 hubs have gone from strength to strength since they were launched. Countless tests,reviews and of course rider feedback have shown that the Pro 2 is everything that we designed it to be.

This hub features a one piece 7075 aluminium rotor body and pawl carrier. Four pawls engage into a twenty-four tooth steel ratchet which is fixed into the hub shell and is sealed with a frictionless, non contact labyrinth seal. The axle runs on five cartridge bearings.

The following types are available and can be interchanged with additional spacers/axles which are available separately: – Rear QR – Rear 10mm Saint – Rear 12mm (135) – Rear 10mm Bolt in (135) – Syntace X12 142mm.

The rear hub is also available in 12mm/150mm wide (note this is a new hub. Not a conversion).

This short video by Sam Needham takes you through step by step how to service your Pro 2 Evo rear hub.”

www.hopetech.com

 

X

Also in Video

How to: Braking masterclass with Fabien Barel

Read More